GPS and IMU Board For Mini 3 Pro

Description

The Mind and Compass of Your Drone

Behind every smooth takeoff, steady hover, and perfectly timed return-to-home is the unseen genius: the GPS and IMU Board. This tiny yet mighty part is what allows your DJI Mini 3 Pro to understand where it is, how it’s moving, and which way is up. If your drone starts drifting weirdly, hovering like it’s tipsy, or doesn’t know how to get back home, chances are this board is the problem. Replacing it brings back your drone’s navigation IQ, letting it fly with direction, precision, and confidence—just like the intelligent bird it’s meant to be.

Key Features

Designed Only for DJI Mini 3 Pro – No Confusion, Just Precision

This board is made specifically for the DJI Mini 3 Pro, with perfectly aligned connectors, mount points, and wiring compatibility. It drops right into place like a VIP guest entering a reserved seat—no awkward fitting, no extra drilling, and definitely no “let’s hope it works” moments.

Built-In GPS for Location and RTH Accuracy

The onboard GPS module is what connects your drone to the satellite network, enabling real-time positioning, map syncing, and the iconic Return-To-Home (RTH) function. A faulty GPS means your drone may not know where it is or where home is—which is cute in toddlers but terrifying in drones. This replacement restores those abilities with full satellite lock and strong positional awareness.

Advanced IMU for Real-Time Movement and Balance

The IMU (Inertial Measurement Unit) tracks your drone’s orientation, pitch, roll, and acceleration. If your drone starts behaving like it’s confused about gravity, this module is usually the culprit. This replacement board gives your drone back its sense of balance, direction, and proper orientation, so it stops doing unwanted acrobatics in the air.

Fixes Sensor Errors, Drift Issues, and Calibration Failures

If your Mini 3 Pro is constantly asking for IMU calibration or showing “GPS signal lost” messages, it may not be just a glitch—it could be hardware failure. Replacing this board clears out those errors, fixes compass confusion, and brings back proper hovering, flight path control, and automatic takeoff stability.

OEM-Grade Performance with Full Compatibility

This is not a cheap knock-off or third-party gamble. This board delivers OEM-level performance, ensuring complete harmony with your drone’s flight controller, battery system, and DJI Fly app. After replacement and calibration, your drone flies, tracks, and navigates just like it did the day it left the box.

How to Use

1. Power Off the Drone and Remove Battery: Begin every repair with full safety in mind.

2. Disassemble the Shell Carefully: Use precision tools to access the internal components.

3. Remove the Faulty GPS/IMU Board: Gently disconnect all ribbon cables and screws.

4. Install the New Module: Align it properly, secure it, and reconnect all connectors firmly.

5. Calibrate GPS and IMU Using DJI Fly App: This is crucial to ensure accurate and safe flight performance.

How to Clean

1. Handle with Antistatic Gloves or Tweezers: No touching sensitive areas with bare hands.

2. Blow Dust Off Using Compressed Air: Keeps it clean without causing damage.

3. Avoid Any Type of Liquid Cleaner: Even a drop can cause corrosion or shorts.

4. Brush Around Ports and Sockets Carefully: Especially before installation.

5. Store Clean in a Dust-Free Container Before Use: Keep it dry and safe until you’re ready to install.

How to Take Care

1. Avoid Dropping or Bending the Board: Even slight physical damage can break internal circuits.

2. Never Power On Mid-Install: Always double-check connections first.

3. Keep Away from Magnets and Heat: GPS signals and sensors don’t like extreme environments.

4. Recalibrate After Hard Landings: Even if it seems fine, recalibration ensures safety.

5. Don’t Force Connectors During Install: Everything should fit with gentle alignment.

Do’s & Don’ts

Do’s:

• Use only with DJI Mini 3 Pro

• Calibrate properly after installing

• Store in antistatic packaging if unused

Don’ts:

• Don’t mix with parts from other models

• Don’t install with battery connected

• Don’t ignore repeated IMU or GPS errors—replace early

Safety Tips

1. Work on a Static-Free Surface with Proper Tools

2. Label All Screws and Connectors During Disassembly

3. Test the Drone Indoors in Safe Mode Before Full Flight

4. Check GPS Lock Before Takeoff Every Time

5. Perform Sensor Calibration After Replacement

Final Take

The GPS and IMU Board for DJI Mini 3 Pro isn’t flashy, but it’s absolutely essential. When this part fails, your drone turns into a confused bird with no sense of direction. Replace it and restore full satellite connection, smooth flight control, and reliable orientation. Let your drone fly smart again—not just fast.

Order now and bring back your drone’s sense of direction—because a lost drone is just an expensive flying mystery.