DJI Mini 3 pro Full Gimbal With Lens

Description

Your Drone’s Neck, Eye, and Brain—All in One

The Full Gimbal with Lens is the beating heart and moving head of your DJI Mini 3 Pro. It’s the part that not only sees but also moves with the grace of a professional dancer. If your drone had a bad fall, if the camera is blurry, shaking, or spinning like it’s dizzy, this is the replacement that brings everything back—the lens, the stabilizer, and the magic. Whether your original gimbal is shaky, broken, or completely non-responsive, this unit restores your drone’s cinematic performance and makes it ready to fly and film like new.

Key Features

Complete Gimbal Assembly with Camera Module Included

This is not a half-repair—it’s the full gimbal unit, including the original camera lens, image sensor, motorized stabilizers, and flex cables. That means if your gimbal is physically broken, burnt out, or showing constant error messages, you don’t need to fiddle with separate parts. One unit. One fix. One perfect replacement.

Compatible Only with DJI Mini 3 Pro

This part is precision-engineered for the DJI Mini 3 Pro, not for the Mini 3 or Mini 2. All connectors, mounting points, and wire lengths are tailored to this specific model. That means no guesswork, no retrofitting, and no risky experiments. Just plug in, secure, and calibrate—it’s back to original performance in no time.

3-Axis Motorized Stabilization for Super Smooth Footage

This gimbal uses 3-axis motor stabilization to ensure your camera stays steady even when the drone is banking, diving, or hovering in strong winds. Whether you’re capturing cinematic pans or fast-paced tracking shots, this gimbal keeps things smooth, sharp, and professional—no post-edit stabilization needed.

4K HDR Camera Sensor with Original DJI Lens

Included in this assembly is the original DJI camera sensor and lens, capable of capturing stunning 4K HDR video and high-resolution stills. It brings back the same image quality you loved, with crisp detail, accurate color, and buttery motion capture. Perfect for filmmakers, YouTubers, or proud weekend pilots.

Pre-Installed Flex Cable for Hassle-Free Replacement

The full gimbal comes with the flex cable already attached, saving you time and frustration during installation. It connects directly to your drone’s core board and is ready to sync with your flight controller right after installation. No soldering, no splicing, no “hope this fits” situations—just a smooth plug-and-fly experience.

How to Use

1. Turn Off Drone and Remove Battery: Always start with zero power.

2. Disassemble the Front Shell to Access the Gimbal Mount: Use precision tools and work gently.

3. Unplug the Old Gimbal and Remove Screws: Keep all parts labeled for reassembly.

4. Install the New Gimbal with Flex Cable: Align the unit and connect it properly to the board.

5. Reassemble the Drone and Calibrate Gimbal in DJI Fly App: It’s ready for action once aligned.

How to Clean

1. Use a Microfiber Cloth to Clean the Lens Surface: Avoid scratches and smudges.

2. Blow Dust Off the Gimbal Motors with Compressed Air: Helps prevent mechanical wear.

3. Wipe the Flex Cable Only if Necessary, and Very Gently: No pulling or bending.

4. Never Use Alcohol or Water Near Connectors or Motors: You don’t want a short circuit or corrosion.

5. Clean the Unit Before and After Installation: Keeps performance crisp and prevents dust jams.

How to Take Care

1. Avoid Touching the Lens and Sensor with Bare Hands: Fingerprints and oils ruin clarity.

2. Store the Drone in a Padded Case During Transport: Protect the gimbal from bumps.

3. Don’t Power On with a Loose or Misaligned Gimbal: Could burn out the motors.

4. Run Gimbal Calibration After Any Crash or Repair: It resets stabilization performance.

5. Inspect Gimbal Movement Before Every Flight: Make sure it isn’t jammed or restricted.

Do’s & Don’ts

Do’s:

• Use only with DJI Mini 3 Pro

• Calibrate after installing to restore camera balance

• Handle with care during installation—gimbal motors are delicate

Don’ts:

• Don’t install with the battery connected

• Don’t force connectors or over-tighten screws

• Don’t leave the gimbal exposed during storage—it’s vulnerable to dust and shocks

Safety Tips

1. Use Static-Free Tools and a Clean Work Area

2. Avoid Excessive Pressure During Install

3. Double-Check All Connections Before Powering On

4. Keep Lens Cap On When Not in Use

5. Recalibrate Gimbal After Firmware Update or Repair

Final Take

The Full Gimbal with Lens for DJI Mini 3 Pro is your drone’s second chance at a smooth, cinematic life. With the lens, stabilization motors, and flex cable all included, this all-in-one solution brings back the visual magic you expect from your favorite flying machine. Whether you’re repairing crash damage or upgrading your footage game, this gimbal delivers performance, reliability, and DJI-quality imagery.

Order now and let your Mini 3 Pro see clearly and fly smoothly again—because a blind, wobbly drone is just an expensive fan with delusions of grandeur.